Thermal imaging cameras
See heat problems while equipment runs.
- Switchgear and panel inspections
- Motors, bearings and couplings
- Building envelope and roofs
RangesFLIR C-Series, E-Series and T-Series · Megger TC120 to TC640
Get a recommendation
Solutions / Thermal imaging
Heat, Spoken.
See hot connections, overloaded circuits and failing bearings while everything is still running. And with acoustic and gas imaging, the leaks you cannot see at all.
What it tells you
Heat shows the problem before it trips.
Connections
A loose or corroded joint
Resistance rises, the joint heats, and the heat spreads before anything fails.
Circuits
An overloaded circuit or phase
One phase running warmer than its neighbours points to load or balance.
Rotating parts
A bearing or coupling wearing out
Friction shows as heat long before noise or vibration.
Buildings
Moisture or missing insulation
Damp and gaps change how a surface holds heat.
What we supply
Product groups
Tell us the job and we will recommend the model. No price lists here: the right instrument depends on the site.
Fixed thermal monitoring
Watch critical assets around the clock.
- Substations and transformers
- Conveyors and kilns
- Alarms when a set point is crossed
RangesFLIR A-Series fixed cameras
Get a recommendation
Acoustic imaging cameras
See sound, and find what you cannot hear.
- Compressed air and gas leaks
- Partial discharge on switchgear and lines
- Steam and vacuum leaks
RangesFLIR Si2-Series: Si2-LD, Si2-PD and Si2-Pro
Get a recommendation
Optical gas imaging cameras
See gas leaks the eye cannot.
- Methane and VOC leaks
- Leak detection and repair programmes
- Refineries, plants and pipelines
RangesFLIR G-Series optical gas imaging cameras
Get a recommendation
Moisture and building diagnostics
Find damp, leaks and missing insulation.
- Roof and wall surveys
- Leak tracing behind finishes
- Handover inspections
RangesFLIR MR-Series moisture meters, such as the MR265 · Extech
Get a recommendationSome instruments need an export licence. We check before you order and tell you the timing.
Check a hot spot
Measured a temperature rise? See how serious it is.
Compare the hot part with a similar part under similar load. The bands follow NETA MTS Table 100.18.
Hot spot checkTry it here
°C ΔT
Priority 3
Probable problem. Plan the repair at the next planned outage.
Bands for similar parts under similar load, after NETA MTS Table 100.18. Guidance for trained people; always follow your site's safety rules.
How we help
From the first scan to a report your managers read.
Choose
The right camera
We help you pick the resolution and lens for the distance and the size of the target.
Train
Your first scans
We show your team how to scan safely, set emissivity and read what they see.
Report
A simple routine
We help you set up a short report with priorities, so findings turn into repairs.
Questions
Questions people ask
Your question is not here? Send it to us and we will answer it properly.
Yes, that is the point of thermography. Follow your site's electrical safety rules and wear the right PPE.
It depends on how far you stand from the target and how small it is. Tell us the job and we will recommend one.
Emissivity, reflections and load all change what the camera shows. Training covers how to set them up for each job.
Yes. Acoustic imaging cameras pick up compressed air leaks and partial discharge by sound and show them on screen. Optical gas imaging cameras make gas leaks such as methane visible. Some gas imaging models need an export licence; we check that before you order.